Lanco TF 1725

微信
新浪微博
QQ
QQ空间
豆瓣网
百度贴吧
脸书
X
领英
产品详情

PRODUCTDESCRIPTION

Lanco TF 1725 is aneffective additive for increasing abrasion resistance and slip. The combinationof PTFE and polyethylene wax does not tend to agglomeration and is thus veryeasily dispersible.

FEATURES/BENEFITS

 Very good surfacesmoothness through combination of pure PTFE and hard polyethylene wax

 High scratch resistance and hardness

 Good metal-marking resistance through reduction ofcoefficient of friction

 Good marresistance

PHYSICALCHARACTERISTICS*

AppearanceFree-flowing white powder

Chemical Type PTFE /polyethylene wax

Particle Size**,Maximum. (µm) Dv50 6

Dv90 14

Melting Point (ºC)125

Density (g/cm³) @ 25°C(77°F) 1.01

Acid number (mgKOH/g) < 1


* Property valuesrepresent typical results only and are not to be considered specifications.

** Determined byLaser Diffraction  

TYPICALAPPLICATIONS

 Can and coil coatings

 Powder and industrial coatings

 Wood coatings and UV-curing coatings

 Overprintvarnishes, flexo and gravure inks

Based on:

 Acrylics

 Alkyds

 Polyurethanes

 N/C and N/C combination finishes

 Epoxies

 Polyesters

 Hybrid systems


SHELFLIFE/STORAGE


Incorporation

Lanco TF 1725 is   very easily dispersible. It can be incorporated using normal stirrers. In   very low viscosity systems high shear mixers such as dissolvers or bead mills   may be required.

Addition levels

For improvement of   surface properties such as slip and scratch resistance, addition rates of   0.05 - 2.0% Lanco TF 1725 are recommended, based on total formulation.

If addition rates   of over 2% are used in coatings where repair or overprinting are necessary,   inter coat adhesion should be checked.


For shelf lifeinformation please refer to the packaging label and the Certificate ofAnalysis. It provides the date of manufacturing (DOM) and a recommended re-testdate (RRD). The RRD for Lanco TF 1725 is 1825 days after DOM.  

Lanco TF 1725 shouldbe stored on pallets in closed areas. In relatively warm storage areas the bagsshould not be stacked too high. A storage temperature of 40°C should not beexceeded.

REGULATORYSTATUS

Please see the product’s current safety datasheet, SDS, for regulatory information. You can contact us



联系我们
电话咨询 13825432352
邮箱 dgsodro@126.com
微信客服